안녕하세요. 

 

오늘은 C9200CX 패스워드 리커버리에 대해서 알아보겠습니다. 

 

콘솔케이블을 연결하고 아래처럼 버튼을 누르고 있습니다. 그리고 재부팅 합니다. 

 

 

BG148HN2>
Initializing Hardware...

System Bootstrap, Version 17.14.1r [FC1], RELEASE SOFTWARE (P)
Compiled Fri 12/15/2023 14:15:51 by rel

Current ROMMON image : Primary
C9200CX-12T-2X2G platform with 4194304 Kbytes of main memory

boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf

boot: failed to load flash:/user/packages.conf (Aborted)

ERROR: failed to boot from flash:packages.conf (Aborted)
switch:

 

SWITCH_IGNORE_STARTUP_CFG=1
boot flash:packages.conf

switch: SWITCH_IGNORE_STARTUP_CFG=1
switch: boot flash:packages.conf
boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf

##############


Switch>
Switch>
Switch>en
Switch#copy stat
Switch#copy sta
Switch#copy startup-config run
Switch#copy startup-config running-config
Destination filename [running-config]?
14082 bytes copied in 4.184 secs (3366 bytes/sec)
CISCO#

Cisco(config)#username cisco privilege 15 secret cisco1234^^
Cisco(config)#
Cisco(config)#
Cisco(config)#en
Cisco(config)#ena
Cisco(config)#enable se
Cisco(config)#enable secret cisco1234^^

Cisco#wr

 

그리고 다시 아래 버튼을 클릭 한다음에, 스위치를 재부팅 합니다.

 

Initializing Hardware...

System Bootstrap, Version 17.14.1r [FC1], RELEASE SOFTWARE (P)
Compiled Fri 12/15/2023 14:15:51 by rel

Current ROMMON image : Primary
C9200CX-12T-2X2G platform with 4194304 Kbytes of main memory

boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf

boot: failed to load flash:/user/packages.conf (Aborted)

ERROR: failed to boot from flash:packages.conf (Aborted)
switch:

 

SWITCH_IGNORE_STARTUP_CFG=0
boot flash:packages.conf

 

Warning: adding member GigabitEthernet1/1/2 without policy will cause inconsistency with port GigabitEthernet1/1/1 in ether channel 1.


Press RETURN to get started!


Cisco>
Cisco>
Cisco>en
Password:
Cisco#
Cisco#
Cisco#

 

지금까지 [C9200CX]-Password Recovery - 패스워드 리커버리 글을 읽어주셔서 감사합니다.

+ Recent posts